Shredder Running Continuously

Kavinstar® has an auto start/stop feature, but after shredding it does not shut off. Do I need to return the shredder?

In most cases, if a shredder is running continuously, this does not indicate that anything is broken.

A majority of Fellowes shredders have 2 small electronic sensors in the throat of the paper entry slot. These are designed to work by shooting a signal to each other; when the signal is broken (by paper entering the throat) the shredder turns on, and when the paper passes through completely, the sensors are able to recognize the signals and the shredder turns off.

If paper dust, debris or oil has covered the sensors it can break the signals (indicating to the shredder that paper is being entered) and can cause the shredder to run continuously. This is a little bit more of a problem on cross cut shredders since the oil can very easily cloud the sensors.

The good news is that it is as simple as wiping off the sensors to clear away anything that may interfere.



















To locate the sensors, unplug shredder and look in the paper entry throat and in the very center there will be two small sensors that look like small glass beads or marbles. If your model has a safety flap over the cutters, you may need to lift this to get access.  Please note that if you have an Kavinstar® shredder (Shredman - S2, RINO-J25, RINO-J35, JUMBO-S25, JUMBO-S40, RINO-S60, RINO-S99, RINO-S100 etc.) there is a paper gauge lever in the middle of the entry.  You will need to look past this lever in order to locate the auto sensors.


Once you locate the sensors, use a q-tip dampened with rubbing alcohol to wipe away any residue or dust. You may need to clean it a couple of times.  Also if there is any visible paper debris in this area, remove with q-tip or needle nosed pliers.

Almost all of the time, this procedure will solve the problem, and may be repeated as part of routine maintenance as needed.

If you do not have electronic sensors, see below for additional instructions.
----------------------------------------------------------------------------------------------------------------------

Some of Fellowes smaller home shredders offer a mechanical sensor rather than the electronic version.

Mechanical sensors are also located in the very center of the paper entry throat and look like a small plastic divider in the middle of the cutting blades. In most models the sensor is white, but can also be gray or black.

How does it work? When paper is entered into the shredder, the mechanical sensor is pressed down causing the shredder to start shredding. Once paper has passed through, the sensor will release to normal position and stop shredding.

If paper debris is putting some weight on the sensor it could be 'stuck down' and not able to return to the normal position. This can happen more often if you recently had a jam that was able to be reversed out.

With the shredder unplugged, locate the sensor and remove any paper debris from around or under the sensor . If the shreds are not reachable, use a tweezers or needle nosed pliers to remove unnecessary paper.

Be careful to not put too much force on or around the mechanical sensor as to not damage it.

If you are having difficulty with this troubleshooting, or the troubleshooting did not resolve your problem, click the "Ask a Question" tab above to contact a customer service representative by email 24 hours a day. Generally customer service will respond the next business day.

 

What is a Continuous-Duty Paper Shredder and Why You Should Have It in Your Office?

When choosing a new paper shredder for your office, you absolutely need to look for a continuous-duty model. You may be wondering what that is and why it’s important. This article will not only educate you about this type of device and why you should get one, it’ll give you a few product recommendations as well. Keep reading to get answers to the three most common questions about continuous-duty paper shredders.

Why continuous-duty? What does it mean? If you’ve ever shopped for a paper shredder, you know that there are basically two types of these products: cross-cut and strip-cut. However, shredders can also be classified by whether they’re continuous-duty or not. It simply refers to whether the shredder has the ability to shred non-stop. Many of the less expensive shredders and almost all of the personal-sized machines cannot run continuously. You’re able to use the machine for 5, 10, or 15 minutes and then you need to let the machine cool down. Meanwhile, a continuous-duty machine can shred and shred and shred. You can shred all day and you won’t need to give the machine a break because the motor can handle that amount of work.
Why is it important? There are many reasons to use a continuous-duty shredder. If you have an large office in which multiple people need to shred their documents, a machine that runs continuously can keep your employees productive and get the documents destroyed as quickly as possible, no downtime required. Even smaller offices can benefit from this type of device, as can individuals, especially those who do a lot of shredding. After all, can you imagine what it would be like if you had a large stack of paper to shred and you had to keep letting the machine rest every few minutes? Not only would the chore take a long time, it would be extremely frustrating and stressful. And who needs more stress?
What machines can shred non-stop? Generally speaking, professional-grade units are the machines that are most likely to be able to run continuously. Most of Fellowes’ higher-end models such as the Kavinstar Shredman S-2, Rino-J-25, Rino J-32, Jumbo S-40, S60, S-99, S-100, PowerShred C-420C and MS-460Ci have this ability. (In fact, the MS-460Ci would be a great choice if you want a smaller device for personal or small office use.) German manufacturer Dahle has some departmental devices that can run without end, as does MBM DestroyIt. (Check out their centralized office devices such as the 2604 SMC, a product with the highest security rating possible.) GBC also makes great products, including the ShredMaster GLS28 which can shred 28 sheets at once. Other manufacturers to check out are Martin Yale, Intimus, and HSM.

The bottom line is this: if you need to constantly shred large amounts of paper, a continuous-duty shredder is what you need. It will save you and your employees a lot time, leading to greater productivity. It will also keep you from becoming frustrated with a machine that can’t handle all of your documents. Get a continuous-duty shredder for your office today and you’ll be able to destroy your documents much more quickly.

 

 

 “SHREDMAN 2 SHREDDER MACHINE PRICE IN DELHI, SHREDMAN 2 SHREDDER MACHINE DEALER IN DELHI, SHREDMAN 2 SHREDDER MACHINE SUPPLIER IN DELHI, SHREDMAN 2 SHREDDER MACHINE MANUFACTURER IN DELHI, SHREDMAN 2 SHREDDER MACHINE IN DELHI, SHREDMAN 2 SHREDDING MACHINE IN DELHI, SHREDMAN 2 SHREDDING MACHINE DEALER IN DELHI, PAEPR SHREDDING MACHINE SUPPLIER IN DELHI, SHREDMAN 2 SHREDDING MACHINE, SHREDMAN 2 SHREDDER, SHREDMAN 2 SHREDDER PRICE IN DELHI, SHREDMAN 2 SHREDDER DEALER IN DELHI, INDUSTRIAL SHREDDER MACHINE IN DELHI, INDUSTRIAL SHREDDER MACHINE PRICE IN DELHI, INDUSTRIAL SHREDDER MACHINE DEALER IN DELHI, INDUSTRIAL SHREDDER SUPPLIER IN DELHI, INDUSTRIAL SHREDDER, CONFIDENTIAL DOCUMENT DESTROYER, CONFIDENTIAL DOCUMENT DESTROYER MACHINE DEALER IN DELHI, CONFIDENTIAL DOCUMENT DESTROYER MACHINE PRICE IN DELHI, CONFIDENTIAL DOCUMENT DESTORYER MACHINE IN DELHI, CONFIDENTIAL MINI SHREDMAN 2 SHREDDER MACHINE IN DELHI, CONFIDENTIAL MINI SHREDMAN 2 SHREDDER MACHINE PRICE IN DELHI, CONFIDENTIAL MINI SHREDMAN 2 SHREDDER MACHINE DEALER IN DELHI, CONFIDENTIAL MINI SHREDMAN 2 SHREDDER MACHINE SUPPLIER IN DELHI, SHREDMAN 2 DESTROYING MACHINE IN DELHI, SHREDMAN 2 DESTROYING MACHINE SUPPLIER IN DELHI, SHREDMAN 2 DESTROYING MACHINE DEALER IN DELHI, INDUSTRIAL SHREDDER MACHINE PRICE IN DELHI,”

SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE PRICE IN INDIA, SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE DEALER IN DELHI, SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE SUPPLIER IN DELHI, SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE MANUFACTURER IN INDIA, SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE IN INDIA, SHREDMAN-II CONTINUE RUNNING SHREDDING MACHINE IN INDIA, SHREDMAN-II CONTINUE RUNNING SHREDDING MACHINE DEALER IN INDIA, PAEPR SHREDDING MACHINE SUPPLIER IN INDIA, SHREDMAN-II CONTINUE RUNNING SHREDDING MACHINE, SHREDMAN-II CONTINUE RUNNING SHREDDER, SHREDMAN-II CONTINUE RUNNING SHREDDER PRICE IN INDIA, SHREDMAN-II CONTINUE RUNNING SHREDDER DEALER IN INDIA, INDUSTRIAL SHREDDER MACHINE IN INDIA, INDUSTRIAL SHREDDER MACHINE PRICE IN INDIA, INDUSTRIAL SHREDDER MACHINE DEALER IN INDIA, INDUSTRIAL SHREDDER SUPPLIER IN INDIA, INDUSTRIAL SHREDDER, CONFIDENTIAL DOCUMENT DESTROYER, CONFIDENTIAL DOCUMENT DESTROYER MACHINE DEALER IN INDIA, CONFIDENTIAL DOCUMENT DESTROYER MACHINE PRICE IN INDIA, CONFIDENTIAL DOCUMENT DESTORYER MACHINE IN INDIA, CONFIDENTIAL MINI SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE IN INDIA, CONFIDENTIAL MINI SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE PRICE IN INDIA, CONFIDENTIAL MINI SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE DEALER IN INDIA, CONFIDENTIAL MINI SHREDMAN-II CONTINUE RUNNING SHREDDER MACHINE SUPPLIER IN INDIA, SHREDMAN-II CONTINUE RUNNING DESTROYING MACHINE IN INDIA, SHREDMAN-II CONTINUE RUNNING DESTROYING MACHINE SUPPLIER IN INDIA, SHREDMAN-II CONTINUE RUNNING DESTROYING MACHINE DEALER IN INDIA, INDUSTRIAL SHREDDER MACHINE PRICE IN INDIA,”

MODEL: SHREDMAN S-II

Technical Details: 
Shred type: Crosscut
Sheet Capacity: 16-18 Sheet (A4 Size 70 Gsm)
Item Shred: Paper, Shred CD, Credit Cards, Catalog-Brouchure & Card Board etc.
Shred Size (mm): 4 x 30 mm
Entry  Width: 370 mm
Power Consumption: 220 V, 150 Watt
Safety Measures: Thermal Shutdown on overheating
Start: Auto on/off
Duty Cycle: 2-3 Hour Continue Running
Body Quality: Metallic 
Motor Power: 1 HP/single phase
Shred Capacity: 40/50 Kg. Paper/ Hr. (Approx.)
Operation: Manual
Thermal Overload Protection, Castor, Reverse Option: Yes
Noise (in decibels): 65 dB
Rated Speed: 15 MTR Per Minute (Approx.)
Gross Weight: 70 Kg. (Approx)
Waste Bin: 85 LTR Permanent Open From Backside
Product Size: 23"×20"x43" (Inches), 585 x 510 x 1095(mm)

A continuous-duty shredder is a shredder that’s designed to work for hours on end without overheating. This style of shredder is designed for office use, however, there are home paper shredders designed with continuous duty shredders as well. This type of shredder is perfect for use by multiple people in a departmental or centralized location.

Available on Gem Government E Marketplace
KAVINSTAR INDIA

Call #9818409728

Email: kavinstarindia@gmail.com


REGISTERED & AVAILABLE ON

Shredman-II Continue Running Heavy Duty  Cross Cut Shredder